Working center CDL 33Q
Working center with moving vertical spindle 4 axis controlled by CNC including rotation of the clamp base continuously which allows any angle ranging from -90 ° to + 90 °.
Automatic working cycle. Side profile with integral chip tray; sliding protection front door pneumatically controlled.
Quick change hand tool cone ISO30 pneumatically controlled; automatic tool change with the warehouse to 5 position in option.
Workpiece clamping with 4 pneumatic vices with manual positioning, pneumatic clamping and automatic position control as standard; pneumatic clamping and automatic positioning as an option.
Possibility of working aluminium, PVC, steel up to 4 mm and stainless steel up to 3 mm with specific accessory.
The ’33Q’ version has a spindle with a maximum speed of 12,000 rpm, the ’33Q with electrospindle’ version with a maximum speed of 20,000 rpm.
| hree-phase + neutral power supply | 380/400-50/60 | Volt-Hz |
| Three-phase spindle motor power (33Q version) | 2.2 | kW |
| Electrospindle power S1 (33Q version with electrospindle) | 5.5 | kW |
| Adjustable spindle speed (33Q version) | 1000...12000 | r.p.m. |
| Adjustable spindle speed (33Q version with electrospindle) | 2000...20000 | r.p.m. |
| X-Y-Z axis travel | 3300 -250-200 | mm |
| X - Y - Z axis positioning speed | 65-25-25 | m/min |
| Adjustable A-axis vice table tilting | -90°...+90° | ° |
| A-axis rotation time from 0...90°. | 3 | sec |
| Axis positioning tolerance | +/- 0.1 | mm |
| Clamp capacity (bxh) | 160x120 | mm |
| Maximum end mill diameter | 10 | mm |
| Maximum disc cutter diameter | 140 | mm |
| Weight | 1850 | kg |
Sales and Customer Service:
Morning from 08:30 to 12:30
Afternoons from 14:00 to 18:00
